3 Things Odd Bikes Different

You’ll have to get used to these if you have one

Ever heard of a penny farthing? Perhaps you have, if you landed here. A penny farthing is a specific type of odd bike, one of the first, actually, with a large front wheel and a smaller, trailing rear wheel. This actually yields the name, though that is a topic for a different time.

Anyway, learning to ride an odd bike like this is going to require you to get used to some new things. Namely, these 3 – take them to heart.

You’ll Need to Get Used to the Higher Center of Gravity

Because these odd bikes lack a chain drive (more on that in a minute) you’ll need to get used to the fact that you’ll be way higher in the saddle than normal.

This is because, in order to attain a higher speed in the absence of a chain drive, you need a larger wheel. And with a larger wheel comes a larger diameter, which means you need to sit higher to clear it.

Obviously, this has safety concerns, as, all things being equal, a fall from a greater height is more serious than one from a lesser. Always wear appropriate bike safety gear when in the saddle, including a helmet.

You’ll Need to Learn How to Brake

Secondly, braking one of these odd bikes is not like braking a “regular” bicycle. You’re lower on a regular bike, which makes it easier to brake.

If you hit the brakes too hard on one of these, well, you know what happens to a body in motion? It tends to stay in motion. That means if you bring the bike to a stop too hard, you’ll just keep going, right over the front.

This is called “taking a header” and if you can imagine, it is not a pleasant experience.

Therefore,  you need to learn to brake very slowly. In fact, it’s best to coast to a stop by anticipating where you want to end up.

Another penny farthing tip is to step on the pegs over the rear wheel behind the saddle before you apply the brake.

This will lower your center of gravity, put pressure on the rear wheel so it’s less likely to skid, and improve the efficiency of the brakes themselves.

You’ll Need to Learn How to Pedal an Odd Bike Without a Chain Drive

Finally, you’ll need to get used to riding a bike without a chain drive. For those of you that got here from the world of unicycling, this shouldn’t be too big of a shift. For everyone else, though, it means getting used to a direct crank hub interface.

For one thing this means it will be physically harder to pedal, especially when going uphill, because there’s no chain system to mess with to provide differing mechanical advantages. The other thing is that you won’t be able to reach the top speeds you’re used to with other bikes.

Where to Get a New Odd Bike

Still think you want to give riding a penny farthing a try? You can learn more about these – and other odd bikes –  over at Unicycle.com. They also carry all the bike safety gear you need, too. Visit their website for more information or get in touch with them directly.

Leave a Reply

Your email address will not be published. Required fields are marked *

Busniess

What Is a Milling Insert?

Milling is a machining process whereby material is used from a workpiece, which may be metal, plastic, or some other material, using an insert, a drill, a mill, or some other cutting tool appropriate to the application. One class of milling tools is known as milling inserts, which are specialized cutting tools. This short post […]

Read More
Busniess

Why THCa Bundles Are the Smarter Way to Explore Hemp

Buying cannabis products one at a time gets expensive before you’ve learned anything useful. Pick the wrong strain, pay full price, and that purchase collects dust while you start over with something else. Do that three or four times and you’ve spent serious money on a trial-and-error process that didn’t have to cost that much. THCa […]

Read More
Busniess

The Washdown Heater Spec That Most Facilities Are Only Solving Halfway

The conversation about washdown heater selection focuses almost entirely on what happens to the equipment, which makes sense because failed equipment is expensive and traceable. But in every facility that runs regular hose-downs, there’s also a thermal problem that doesn’t show up on a maintenance ticket: workers spending full shifts in cold, wet conditions that […]

Read More