Keeping Your 9mm Costs Down: How to Do It

In the last 5 years, millions of new gun owners have entered the fold, and existing gun owners have bought up ammo stores like mad.

The net effect of this is that for a while, ammo was scarce and where you could find it, prices were through the roof.

While the shortage has largely abated, high prices remain. It is not uncommon to pay twice (or more) for the same ammo as compared to about 5 years ago.

Which has some shooters wondering: How can I save money on 9mm?

Being one of the most popular cartridges in the country, it is in high demand, and while more affordable than many other alternatives, it’s still more expensive than it used to be.

That said, here are some good ways to keep costs down.

Buy 9mm Ammo in Bulk

The single best way to save on 9mm is to buy 9mm ammo in bulk. Instead of buying by the 20 or 25-round box, which will cost you anywhere from 40 cents per round to more than a dollar, buy in larger quantities.

With a larger quantity comes a smaller unit price, and if you buy in bulk, it’s not uncommon to get prices down near or even below 20 cents per round, which, while not quite as good as it was in 2015, is still not bad.

Also, buying   doesn’t just keep the cost down, it will also help you build up a reserve so that if we do experience another run on ammo in the near future, you’ll still have some backup.

Shoot Steel-Cased Loads

Steel-cased ammo, like TulAmmo, is cheaper than brass-cased ammo. If you don’t reload, it’s worth it because you’d just be paying more for brass for no reason.

Also, the myths that steel-cased ammo will harm your gun are false. They might shoot a little dirty, but they are made with annealed steel casings, which means the steel is softened; it won’t scratch your chamber.

Opt for Lighter Loads

Take a look at the box of ammo that you’re shooting. Look at the bullet weight in grains as well as the muzzle velocity. A higher muzzle velocity often indicates a higher propellant charge; a heavier bullet weight indicates the use of more materials.

Shoot something lighter, either in terms of muzzle velocity or bullet mass, and you might be able to shave off a few cents per round.

Try a Different Brand

Lastly, if you’re a brand loyalist, consider adjusting your allegiances. Ammo brands can be expensive but there are a lot of them out there to try. Some of the reputable ones that load 9mm are Speer, Federal, Remington, CCI, Winchester, Hornady, Fiocchi, Magtech, Sellier & Bellot, and Browning, but there are many, many others that load cheaper ammo, too. If all you’re doing is plinking; that is, not using the ammo for competition or defensive applications, you might as well shoot something cheaper and save a little on your hobby.

Stock Up at Able Ammo

Whether you’re here for another brand or just need a place where you can buy 9mm ammo in bulk, visit Able Ammo first. They carry plenty of brands in 9mm and other popular handgun loads – check out and bookmark their page.

Leave a Reply

Your email address will not be published. Required fields are marked *

Busniess

Why Lab-Grown Diamond Engagement Rings Are Becoming the Norm for Gen Z Couples

Every generation changes the rules of romance in its own way. For Gen Z, the change is happening at the center of the ring. Lab-grown diamond engagement rings have gone from a niche alternative to the most common choice. The reasons say a lot about how today’s couples think about money, meaning, and what makes […]

Read More
Busniess

Why Brass Knuckles Are Such Devastating Melee Weapons

If all you’re fighting with are your fists, there are limits to the damage you can inflict, offensively and defensively, regardless of training. Training will take you farther, but at a certain point, you’re bound by the limits of the flesh.  This is what makes brass knuckles for sale such effective melee weapons, although it […]

Read More
Busniess

How to Choose the Right Air Compressor Drain Valve for Your System

Plant teams that pick the wrong air compressor drain valve usually find out the hard way, through wet air at the point of use or a compressor that runs longer than it should. Condensate collects at the receiver, the air dryer, filters and drop legs, and each spot puts a different demand on the drain. […]

Read More