Tips and Pointers for Caring for Your New Nocpix Thermal Scope

So you’ve gotten yourself a new Nocpix thermal scope or monocular; congratulations, you have one of the finest thermal imaging devices in the industry. If you’ve gotten one of the new models, like the MINI 2 H25, you have one that’s capable of more than thermal imaging, and can deliver night vision capabilities as well. 

The investment is also not a small one, and can run you several hundred to several thousand dollars. It’s well worth it, given the performance of Nocpix thermal optics, but it also means that you should take some time to learn how to properly care for the scope. 

Regular cleaning of your new Nocpix thermal scope will ensure optimal performance and will potentially improve image clarity while also extending battery life. Here are some high level notes for care and maintenance. 

  • After use, wipe the optic clean with a microfiber cloth to remove any visible dust or debris. Use an appropriate cloth or lens cleaning device on the lens and sensor in order to prevent damage. 
  • Store the Nocpix scope in the case it came with from the manufacturer in order to prevent an accumulation of dust or other debris. 
  • Inspect the seals on the body of the scope, as well as around the buttons, to ensure that they are in good shape.
  • When in the field, use lens caps compatible with your Nocpix thermal scope, when the scope is not actively in use. This will prevent damage to the lens (and possibly the display) while also keeping dust off of them. 
  • Don’t allow the battery to remain dead or at a low state of charge for any prolonged period of time. Also, use the original charger that came with the optic to keep the battery health topped off. Always maintain a charge level between 50% and 80% and do not attempt to charge at below freezing temperatures or you will damage the battery.
  • Store your Nocpix thermal scope in a cool, dry environment. Both high and low temperatures, as well as high humidity, can damage a thermal scope or its battery.
  • Periodically ensure that the thermal scope’s software is up to date. When performing updates, plug the scope into a charger to prevent power supply interruptions that could interfere with the update. 
  • If you are going to store the scope for a prolonged period of time and it has removable batteries, remove these to prevent parasitic draw and extend battery life, as well as to prevent damage to the electric contacts. 
  • And, as a general rule, handle your Nocpix thermal scope gently. It might be a robust and durable piece of equipment, but it is still an electronic device and an optic that deserves proper handling and respect. 

Here for a New Nocpix Thermal Scope? 

In the event you are in the market for a new Nocpix thermal scope but aren’t sure what model is right for you, get in touch with the professionals at Dark Night Outdoors at 309-781-8421. Let them know what you hunt, what you’re looking for in a thermal scope, and what else you need, and they’ll make effective personalized recommendations based on that. 

For more information about Thermal Scope and Rix Thermal Scope Please visit: Dark Night Outdoors LLC.

Leave a Reply

Your email address will not be published. Required fields are marked *

Busniess

What Makes .408 and .375 CheyTac Two of the Best ELR Cartridges Out There?

You can shoot a rifle chambered in .50 BMG, .338 Lapua, or .300 Norma Magnum at extreme ranges, and it will perform well as long as your rifle is sighted-in properly and you train with it. Both of these cartridges have a vetted history of performance as extreme long-range rifle cartridges, with the former two […]

Read More
Busniess

Sizing a Laboratory Air Dryer for a Few SCFM

Benchtop setups rarely draw much compressed air. Buyers still end up with a laboratory air dryer rated for a machine shop, because the sizing numbers on most spec sheets don’t mean what they look like they mean. Inlet, purge, and outlet flow are three different figures. Sizing to the wrong one either wastes air and […]

Read More
Busniess

Types of End Mills Used in Machining

There is a surprisingly wide variety of different types of end mills used in machining, some of which are used for rough stock removal and cutting a workpiece to shape, and others which are used to impart a desired finish to it, with a whole lot in between. This short post will take a quick […]

Read More