Why a Nylon Muzzleloader Bullet Starter Is Better

One of the things you’ll need to have in your possibles bag, along with a capper (for caplock guys), a flint hammer (for flinters), and a powder measure, is a muzzleloader bullet starter.

Originally called a ball starter from the days when most muzzleloader hunters shot patched round balls out of sidelocks, a bullet starter is like a short ramrod with a (slightly more) ergonomic handle, which is used to get the bullet started down the bore before you seat it fully on the powder charge with the ramrod.

Here’s why a modern nylon muzzleloader bullet starter is better than a traditional wooden one, even if the latter looks better.

Nylon Is Stronger, Dimensionally

The grain of wood may be very strong, but wood can split fairly easily along the grain, especially when stressed or improperly cared for. This is true even of strong, dense species like maple and oak, which are commonly used to make muzzleloader ball starters.

That being said, nylon is stronger overall, across all dimensions, than wood, and if it is stressed it is more likely to deform or bend than break, since it is a relatively soft plastic.

Nylon Will Not Absorb Water and Will Not Rot

As good as wood is, wood can absorb water, which will cause it to weaken and break down over the long run.

This is a problem in its own right, but it also means that wood can rot over time. Nylon is much more stable and requires no maintenance or storage considerations, whereas wood does.

Nylon Will Not Split or Break

Even though wood is strong, it can still break, and that’s a considerable problem if you’ve already got the bullet started down an inch or so from the muzzle.

Getting stuck there is not far enough that you should be able to use a ramrod to finish the job, which means you’ll be up a creek. The issue will be worse if part of the starter is stuck in there with the bullet.

Nylon can bend a little without breaking and as stated is more likely to deform than break, which makes it more reliable on the whole.

Because Performance Isn’t About Looks

Lastly, even though a finished hardwood ball starter might look pretty, and fit the appropriate traditional aesthetic associated with muzzleloading, at the end of the day, what you need is not looks but reliability.

Nylon is strong, reliable, doesn’t break, and when fitted with the appropriate loading jag is very precise, giving it several considerable advantages over wood.

Where to Get a Nylon Muzzleloader Bullet Starter

Are you sold on the relatively advantages of modern nylon muzzleloader bullet starters over wood? If so, you just need to know where you can go to get one.

Visit Anarchy Outdoors first. They carry a wide range of traditional and modern muzzleloader accessories, including loading blocks, speed loaders, powder funnels and cappers in addition to bullet starters. Check out their collection and bring your possibles bag into the 21st century with a little help from their collection

Leave a Reply

Your email address will not be published. Required fields are marked *

Busniess

Understanding the Quality and Value of a Lab-Grown Diamond Tennis Bracelet

A lab-grown diamond tennis bracelet offers lasting elegance, everyday comfort, and exceptional craftsmanship in a single piece of jewelry. While its timeless appearance captures immediate attention, its true value comes from careful construction, quality materials, and thoughtful design. Understanding these details helps you appreciate what makes a bracelet beautiful, durable, and enjoyable to wear for […]

Read More
Busniess

Roller-Delayed PCCs: 9mm vs. 10mm

That one extra millimeter in caliber makes a serious difference in cartridge performance between the 9mm Luger and 10mm Auto. If you’re tossed up between a roller-delayed PCC chambered in one of these, here’s what you should know about them. Where the 9mm Excels If you’re considering a roller-delayed PCC chambered in 9mm, here are […]

Read More
Busniess

The Checklist Facilities Managers Use Before Ordering PTAC Units

Facilities managers who’ve been through a commercial HVAC procurement cycle before don’t start with a brand name. They start with a list. Ordering PTAC units for a multi-room property involves more variables than most buyers expect, and the teams that get it right aren’t necessarily the ones with the biggest budget. They’re the ones who […]

Read More