Why a Mesh Pool Cover Is an Indispensable Accessory

If you’re looking for safety pool covers, you have two basic options: solid safety covers, and mesh safety covers (and possibly some hybrids). As a general rule, though, your options boil down to these two.

Now, there are plenty of reasons that a solid pool safety cover offers value, ranging from inhibiting algae to economizing consumption of pool chemicals – but that doesn’t mean mesh pool covers are without their own virtues.

This short list will break down some of the advantages of mesh covers.

Maintenance Considerations: No Cover Pump Needed

Solid pool covers require a special extra piece of equipment known as a cover pump, the purpose of which is to remove standing water from the top of the cover. This adds an expense, both in terms of the device itself and in energy consumption. The design of mesh pool covers eliminates the need for these pumps (more on that below).

Energy Savings

While mesh pool covers are not as effective at mitigating temperature changes as solid pool covers, they can both help keep a pool warm or cool, depending.

In hot water, mesh pool covers block much (though not all) of the sun’s light, helping to keep the pool cooler. On the flipside, they help slow thermal transfer in the cooler months, saving you money on pool heating costs.

Durability

Believe it or not, mesh pool covers actually take the edge here, although it might seem as though the opposite would be true.

This is primarily because mesh pool covers allow rain and snow to pass through, and the design also helps prevent ice from accumulating in the winter months.

As a result, mesh pool covers tend to last longer than solid pool covers when properly cared for. And, on top of that, like solid pool covers, they also block a great deal of leaves and debris from entering the pool (although not all of it).

They’re Easier to Handle Than Solid Pool Covers

Mesh pool covers usually weigh substantially less than solid pool covers, and you might even find that some take up less space. This makes it easier to handle and store mesh pool covers than their solid alternatives.

They Also Boost Safety

This is not necessarily an advantage of mesh pool covers, but it is important to note that they, like solid pool covers, also improve safety by helping to prevent children, pets, and bystanders from falling in.

Cost Efficiency

Mesh pool covers are often much more affordable than solid pool covers, making them ideal for pool owners on a budget.

A New, Lightweight Mesh Pool Cover Is Waiting for You…

Thinking it might be time to retire your aging solid pool cover in favor of a new, lighter, mesh pool cover?

Get what you’re looking for online at Best Buy Pool Supply. They carry a wide range of mesh covers (as well as solid covers) along with everything else you need – chemicals, equipment, cleaners, and more.

Check out their catalog and if you still have questions about pool covers, contact them at 800-877-1268. They’ll help you get what you need.

Leave a Reply

Your email address will not be published. Required fields are marked *

Busniess

What Makes .408 and .375 CheyTac Two of the Best ELR Cartridges Out There?

You can shoot a rifle chambered in .50 BMG, .338 Lapua, or .300 Norma Magnum at extreme ranges, and it will perform well as long as your rifle is sighted-in properly and you train with it. Both of these cartridges have a vetted history of performance as extreme long-range rifle cartridges, with the former two […]

Read More
Busniess

Sizing a Laboratory Air Dryer for a Few SCFM

Benchtop setups rarely draw much compressed air. Buyers still end up with a laboratory air dryer rated for a machine shop, because the sizing numbers on most spec sheets don’t mean what they look like they mean. Inlet, purge, and outlet flow are three different figures. Sizing to the wrong one either wastes air and […]

Read More
Busniess

Types of End Mills Used in Machining

There is a surprisingly wide variety of different types of end mills used in machining, some of which are used for rough stock removal and cutting a workpiece to shape, and others which are used to impart a desired finish to it, with a whole lot in between. This short post will take a quick […]

Read More