The Everpure H300 water filter is by far one of Everpure’s most popular home water filtration systems. These filters are well-known for a reason, and they are an excellent choice for anyone looking to add a convenient source of filtered water to their kitchen. There are a few factors to consider, as with any water filtration system, to ensure that the H300 is the best fit for your kitchen.
The H300 water filter, like all Everpure water filtration systems, is designed to be simple to install by any homeowner. Many homeowners are concerned about the cost of hiring a plumber to install their new filtration system. Fortunately, the entire installation can be completed with only a few simple hand tools.
All you have to do is screw the filter head to the inside of your cabinet at the appropriate height, add a small adapter to your cold water intake, and connect the two with a few hoses. After screwing the filter cartridge into place, all that remains is to connect the water output to our water dispenser.
The Everpure H300 water filter requires the installation of a small dedicated faucet in order to dispense water. One of these drinking water faucets can be installed in your countertop or on a flat metal area of your sink. One of the most difficult aspects of installing the H300 in your kitchen is this addition. If you are fortunate enough to be considering installing a filter as part of a kitchen remodel, it is simple to plan to drill a hole in your countertop or purchase a sink with an accessory hole preinstalled.
Once the filter head and dispenser are installed, all that remains is to insert a filter cartridge, regardless of the system. Everpure’s incredible filtration power is derived from their cartridges. The H300 filter has a unique internal media design in which Everpure’s proprietary Micro-Pure media is arranged in a pleated ring to maximize surface area while allowing water to flow easily through the cartridge.
The lifespan of a filter cartridge is the most important factor to consider when choosing a system. The number of gallons of water that an Everpure filter cartridge can handle determines its lifespan. The H300 filter cartridge can handle up to 300 gallons of water before needing to be replaced. These cartridges must be replaced once a year, and each Everpure cartridge includes an indicator sticker that will change from white to solid red over the course of the year.
You may notice that the flow from your H300 cartridge begins to slow down before a full year has passed, depending on how much water your household consumes. If this is the case, simply flip the shut off valve on your Everpure H300 filter head, remove the spent water filter cartridge, and replace it with your replacement filter cartridge. When installing a new cartridge, run the system for a few minutes to clear any air from the lines.
Some homeowners may be concerned about what will happen if they consume more filtered water than expected and end up using more cartridges. Fortunately, most Everpure replacement cartridges are interchangeable, providing Everpure users with numerous options. At 300 gallons per cartridge, the Everpure H300 is one of our lowest capacity systems. When shopping for replacement cartridges, you can easily upgrade to a cartridge that will filter thousands of gallons of water.
So, if you’re looking for a dependable water filtration system, the Everpure H300 water filter system is hard to beat. These filters are not only simple to install and use, but they can also be upgraded to meet your needs if you require a larger cartridge capacity. If you are ready to add a new Everpure filter to your home, you will find a great selection of options at www.efilters.net.
